background image

DCX3501-M Quick Start Guide

1

Before You  Begin

Introduction

Congratulations on receiving a Motorola DCX3501-M HD Dual Tuner DVR. This document will help you set up your DCX3501-M set-top to quickly 
get it up and running.

READ THIS  FIRST

1. Determine if you are connecting to a:

2. Determine if you are connecting the audio to a home theater receiver or directly to the TV:

•  For an HDMI or IEEE-1394 video connection, no additional audio connections to the TV are required.
•  For a DVI video connection, additional audio connections to the TV are required.
•  If the receiver or TV has a digital audio (S/PDIF) input, use the Digital Audio (S/PDIF) output. Otherwise, use the left and right (RCA phono) 

audio outputs. 

3. Locate the cabling diagram(s) that best match the configuration.
4. Connect the audio and video cables in a manner matching that diagram.
5. Connect the Cable In terminal to the coaxial cable wall outlet.
6. Connect the power cord to the set-top and the electrical wall outlet.
7.  Perform the operational check for the remote control.
8. Optimize the high-definition settings. 

High-Definition TV (HDTV) 
or monitor

Use the HDMI, component video (YPbPr), or IEEE-1394 outputs. No other video connection supports HDTV.
If the TV has no HDMI input but does have a DVI input, connect a DVI-to-HDMI adapter or cable to the HDMI 
out connector on the DCX set-top and the DVI input connector on the TV.

Standard-Definition TV

Use the RF Out connector on the DCX set-top, if the TV does not support S-Video or composite video 
connections. The RF connection carries video and audio.

Additional information for adjusting user settings

The DCX set-top User Settings menu allows you to adjust the video, audio, and closed captioning configuration of the set-top.

The User Settings menu can be accessed from the DCX set-top remote by pressing 

Power

 and then 

Menu

 within 2 seconds.

For more detailed instructions on changing the set-top configuration through the User Settings menu, please refer to the DCX3501-M User 

Guide available online at 

http://motorola.com/homevideo/support

.

Summary of Contents for DCX3501-M

















Reviews: