Motorola DCX3200 P2, User Manual, Page: 19 / 57

3 CONNECTING YOUR DCX SET-TOP
9
•
Composite Video (also referred to as Video) — SDTV
If an S-Video input is not available on your TV, use the
composite video (video) connection.
Note: Composite video does not provide audio. A separate
audio connection must be made.
Connecting HDTV — Single Connection for Video/Audio
Cable In
Connect an RF coaxial cable to the cable wall outlet and the cable in
connector on the DCX set-top.
HDMI
If your TV has an HDMI input, this is for both audio and video if you are
using the TV speakers. Connect a Standard HDMI cable to the TV and
to the HDMI connector on your DCX set-top.
IEEE-1394
If your HDTV has an IEEE-1394 connector, you can use the IEEE-1394
for both your video and audio connection. Connect an IEEE-1394 cable
to the IEEE-1394 connector on your HDTV and DCX set-top.
Note: On-screen graphics will not be displayed when you are using the
IEEE-1394 connection on the rear panel of the DCX set-top. Refer to
Section 5 for more information.
If you have an audio/video receiver and are not using your TV’s
speakers, go to
Connecting Your DCX Set-top to an A/V Receiver — Audio .