Motorola CP100, User Manual

Page: 47 / 128

41
Fr
eque
ncy and Code Ch
ar
ts
Verifying the SP21 Frequency and Code Setting
The CP100 Two-Way radio replaces the SP21 radio. The factory default settings for
both radios are identical. However, existing radios may have been programmed to
different settings. To program your CP100 radio to talk with an SP21 radio, verify or
change your SP21 frequency and code settings as follows.
1. Press and hold
M
while you turn on the radio to enter programming mode.
The radio announces current frequency for that channel. For example: “frequency one.”
2. If desired, press
M
to scroll through the frequencies.
The radio announces each frequency as you scroll. For example: “two...three...”
3. Release
M
when you reach the desired frequency.
4. Press
Q
to select and save the frequency setting.
The radio announces current code setting. For example: “code two nine”
5. Press
M
to scroll through the codes.
The radio announces each code as you scroll. For example: “three zero...three one”
6. Release
M
when you reach the desired code.
7. Press
Q
to select and save the code setting.
operation.fm Page 41 Thursday, June 5, 2003 2:25 PM