Motorola CompactPCI CPX2000 Series, Installation And Reference Manual

Page: 51 / 136

3-10 Literature Center Web Site
Installing the CPX2000 Series System and Field Replaceable Units
3
Installation Troubleshooting
Refer to Table 3-2 to solve some basic problems that may occur after
installing the chassis.
Cleaning and Preventive Maintenance
Motorola computer systems require minimal maintenance and care to keep
them operating properly. Once the installation is complete the most
important part of system maintenance is to regularly clean filters and
removable-media devices. Regular cleaning is a customer responsibility.
BIOS Error Reporting
The CPV5000 and CPV5300 CPUs run a standard BIOS which report
errors by a series of beep sounds or when an error message is displayed to
the screen. Refer to
Table 3-3 for AMIBIOS error reporting information.
Table 3-2. Guide for Troubleshooting CPX2000 Series Chassis
Installation
If: Then:
Disk drives do not respond Ensure that power and data cables are
firmly and properly connected.
Green “power-on” LEDs fail to light Check the AC power cable and check
the AC fuse.
Table 3-3. AMIBIOS Error Reporting
If: Then:
The error occurs before the
display device initializes. A series of beeps sound. Beep codes indicate
that a fatal error has occurred. Refer to
Table
3-4
for information about the beep codes.
The error occurs after the
display device initializes. The error message is displayed. A prompt to
press <F1> can also appear with displayed
error messages.