manualshive.com logo in svg

Motorola CLS1110, User Manual

Share
Download
Motorola CLS1110 User Manual Download Page 38

Programming Mode

34

Programming the Interference Eliminator Code

The interference eliminator code helps minimize interference by providing code 

combinations that filter out static, noise, and unwanted messages.
1. In programming mode, press 

S

 until 

y

 displays and the code 

number blinks.

2. Press

 

[

or

 

]

 

to select the code (see page 47).

3.  Press and hold 

Push to Talk

 to exit programming mode, or press 

S

 

 

to continue programming.

Programming the Available Channels (CLS1410 only)

If you need fewer channels, you can reduce the number of available channels.
1. In programming mode, press 

S

 until 

=

 displays and the channel 

number blinks.

2. Press

 

[

or

 

]

 to select the number of channels you want available.

3.  Press and hold 

Push to Talk

 to exit programming mode, or press 

S

 to continue programming.

Note:  

The radio retains settings for channels made unavailable.

Summary of Contents for CLS1110



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands