INSTALLATION
CM5000 TETRA Mobile Repeater/Gateway Installation Manual
25
Figure 2
Power Cable Assembly
5.
Place the fuse holder close to the battery. Ensure that it is not near any hot engine compo-
nent. Mount the fuse holder using its mounting hole and dress the wires as required.
6.
Insert the stripped end of the red lead of the fuse holder into the ring lug hole and crimp it.
Connect the fuse holder red adapter lead plug to the mating receptacle on the red lead of the
power cable.
7.
Connect the red lead ring lug from the fuse holder to the positive (+) battery terminal. Make
sure the adapter cable is connected to the main power cable red lead.
8.
Carefully check that all connections are proper. Insert the fuse into the fuse holder and close
the cover.
Black Lead
(min. 2.5 mm
2
)
To Battery -
To B
Red Lead
Fuse
Fuse Holder
Cover
Red Lead
(min. 2.5 mm2)
Mounting Hole
(min. 2.5 mm
2
)
Red Lead
Adapter
Ring Lugs
(10A)
or Chassis
