Using the phone
15
NOTE
If you have subscribed to your Network’s Caller Identity
service and assigned a VIP Group to the caller’s number, the
caller’s details are displayed before the phone starts ringing
(see “Store an entry” on page 17 and “Group melody” on
page 25). You can set your phone to give the default
ringtone as soon as the call is received then once the caller’s
identity is displayed, the assigned ringtone will start. See
“First ring” on page 26.
TIP
If Auto Pick up mode (see page 27) is on, simply lift up the
handset from its base to answer the call. The default setting
is On.
NOTE
An incoming call has priority over other events. Whenever
there is an incoming call, other operations in progress such
as phone settings, menu navigation, etc. will be ended.
3.7
Adjust volume
1.
During a call, press
u
or
d
to adjust the earpiece or
loudspeaker volume. The level is shown in the handset
display.
3.8
Amplification
The CD2 comes with a dedicated Amplification button which
allows you to boost the earpiece volume.
To switch the amplification feature On:
1.
Press
?
in Talking mode.
AMP ON
will be shown on the
display for 3 seconds. Each earpiece receiving volume
step will be boosted in volume.
When amplification is set to On you can press
u
or
d
to adjust the setting (1-5 steps)
To switch the amplification feature Off:
1.
After the AMP feature is switched ON in talking mode,
then, press
?
again,
AMP ON
will be shown on the display
for 3 seconds and the earpiece receiving volume step
will return to normal.
3.9
Mute
Mute the microphone so that you can talk to someone else
in the room without your caller hearing you.
1.
During a call, press
e
. The microphone is muted.
2.
Press
e
again to turn the microphone back on.