manualshive.com logo in svg

Motorola Canopy E1, User Manual, Page: 9 / 69

Share
Download
Motorola Canopy E1 User Manual Download Page 9

Canopy

  

T1/E1

 

Multiplexer

 

 

 

 

 

 

 

          

June

 

2004

 

 

 

 

 

 

 

     

 

    

T1/E1

 

Multiplexer

 

Release

 

3.1

 

 
 

 

 

9 of 69

 

 

Table 2: Admonition types 

Admonition Label 

General Message 

NOTE: 

informative content that may 

◦

 

defy common or cursory logic. 

◦

 

describe a peculiarity of the Canopy implementation. 

◦

 

add a conditional caveat. 

◦

 provide 

a 

reference. 

◦

 

explain the reason for a preceding statement or provide 
prerequisite background for what immediately follows. 

RECOMMENDATION: 

suggestion for an easier, quicker, or safer action or practice. 

IMPORTANT!

 

informative content that may 

◦

 

identify an indication that you should observe. 

◦

 

advise that your action can disturb something that you may not 
want disturbed. 

◦

 

reiterate something that you presumably know but should 
always remember. 

CAUTION!

 

a notice that the risk of harm to equipment or service exists. 

WARNING!

 

a notice that the risk of harm to person exists.  

 

1.1.4

 

Getting

 

Additional

 

Help

 

Help is available for problems with supported products and features. 

T

he sequence of 

actions that you should take if these problems arise is provided under 

Obtaining 

Technical Support

 on Page 

61

. 

1.1.5

 

Sending

 

Feedback

 

We welcome your feedback on Canopy system documentation. This includes feedback 
on the structure, content, accuracy, or completeness of our documents, and any other 
comments you have. Please send your comments to  

[email protected]

. 

Issue

 

1

 

 

Page

Summary of Contents for Canopy E1






































































Reviews:

No comments