Motorola CA50 Developer & User Manual Download Page 49

Page: 49 / 542

Chapter 4 CA50 Modes of Operation

Overview

This chapter covers various information about using the CA50, post-deployment.

Valuable topics in this chapter include:

•

Logging in and logging out (beginning on

CA50 Login - Post-deployment on page 4-2

)

•

Employee identity validation (

page 4-3

)

•

Status icons (

page 4-5

)

•

Keys, controls and features on the device (

page 4-7

)

•

Earbud use (

page 4-13

)

•

Scanning (

page 4-15

)

•

Resetting (

page 4-17

)

•

Desktop menus (

page 4-19

)

•

Walkie-talkie (

page 4-31

)

•

RF network optimization for walkie-talkie communication (

page 4-31

)

•

Naming walkie-talkie channels (

page 4-33

)

•

Voice (unicast) calls (

page 4-36

)

•

Business applications (

page 4-54

)

•

Messaging/paging (

page 11-26

and

page 11-44

NOTE

1. For a complete checklist outlining all the development and deployment activities required to implement
a CA50 solution, see the

Development and Deployment Checklist on page 2-1

2. For a table listing the most commonly requested topics within this manual, see the Quick Startup Guide
on the last page of the manual.

Summary of Contents for CA50































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CA50

Reviews:

Related manuals for CA50

Brands by name

Popular brands

Motorola CA50, Developer & User Manual

Search results

Summary of Contents for CA50

Reviews:

Related manuals for CA50

Brands by name

Popular brands