Motorola CA50, Developer & User Manual, Page: 381 / 542

Maintenance, Troubleshooting and Error Messages 14 - 13
UCA Server System Error Code Number Index
Client Generated Error Messages
Table 14-6 below describes the five sets of client generated error messages.
Table 14-6
Client Generated Error Messages
Error Set Error Message Description
Phone Related Errors
(continued on next
page)
“Destination timeout”
A timeout occurred waiting for the destination to answer the
phone
“Invalid call handle’
The handle used to access the phone subsystem component
is invalid. Contact help desk or technical support for
assistance.
“Invalid state"
The phone call operation is not appropriate for the current
state of the phone subsystem. The phone subsystem may still
be functional depending on the operation attempted. Report
problem to help desk.
“Invalid init string"
The initialization string for the phone subsystem is invalid.
Check user profile and UCA server setup. Report problem to
help desk or technical support.
“Destination invalid"
The destination phone number or extension is invalid when
placing a call or transferring a call. Check extensions on the
UCA server. If problem persists, report problem to help desk or
technical support.
“Not initialized"
An attempt was made to perform a phone subsystem
operation without it being properly initialized. Check UCA
server settings for phone. If problem persists report problem to
help desk or technical support.
"Not registered"
The phone subsystem is not registered to a PBX server or for
direct CA50-to-CA50 IP based call functionality. Check UCA
server and PBX Server settings. If problem persists, report
problem to help desk or to technical support.
“No call exists"
This error may occur if an attempt to transfer a call when one
does not exist. Report problem if it is certain that a phone call
exists.
“Already registered"
This error may occur if an attempt is made to register the
phone subsystem while the phone subsystem is already
registered. Report problem to help desk or technical support.
“Invalid parameter"
This error indicates that an invalid parameter was used when
attempting to access the phone subsystem. Report problem to
help desk or technical support.
“Unknown error"
Report problem to help desk or technical support.