7 - 24 CA50/UCA Client & Server Developer & User Guide
Setting up Walkie-Talkie Channels in the Base Profile
Setting up walkie-talkie channels involves creating or modifying two areas in the base profile: the WTT section and
the menu section.
The WTT section below defines 3 channels: 1, 2 and 3. The values in this section are used to configure the VoIP
subsystem with mulitcast address, port, allowed channels and types, etc.
<WTT Enable=
”Y”
AllowScanMode=
”N”
>
<Multicast IP=
”239.192.2.2”
Port=
”5000”
ChannelIncrement=
”Port”
/>
<ChList>
<Ch ID=
”1”
type=
”LO”
Name=
”Store Broadcast”
SName=
”1”
/>
<Ch ID=
”2”
type=
”Def”
Name=
”Sales”
SName=
”1”
/>
<Ch ID=
”3”
type=
”SCO”
Name=
”Front End”
SName=
”1”
/>
<ChList>
</WTT>
The menu excerpt section below create the UI displayed on the device that enables the user to switch between the
channels defined above. The menu XML below creates a selectable menu entry labeled “WT Channels.” Then “WT
channels” is selected from a menu, a sub-menu displays with two selectable items in the sub-menu: My WT
Settings and Front End.
<Menu ID=
”5”
name=
”SalesWTChannels”
title=
”WT Channels”
>
<entry ID=
”1”
value=
”My WT Settings:S:L:SetChannel:2:Normal”
/>
<entry ID=
”2”
value=
”Front EndSettings:S:L:SetChannel:3:Single”
/>
</Menu>
When “Front End” is chosen from the menu, the CA50 client instructs the VoIP subsystem to se the WT channel to
channel 3 (mote match to CH ID=”3” in the WTT section). When “My WT Settings” is chosen by the user, the CA50
client instructs the VoIP subsystem to set the WT channel to channel 2.
Summary of Contents for CA50
