Motorola CA50, Developer & User Manual, Page: 158 / 542

6 - 48 CA50/UCA Client & Server Developer & User Guide
System Settings
Table 6-2 lists the system settings for CA50 Client/Server software. (See User Profile Elements on page 7-4 for
additional information about System Settings and their values.)
NOTE To enter these settings into the Web Console see page 9-37 .
Table 6-2
System Settings
Setting Description
Client.Backlight.Battery.Timeout In minutes, how quickly the backlight times out while on battery
Client.Backlight.Level Default backlight level on the device. Values are 0 - 4.
Client.Desktop.Link.DefaultScan Default Desktop URL for bar code input.
This setting allows the client to launch a customer business
application with a bar code scanned while the user is at the client
desktop. The sample data included references the
UCASampleApp2. Note that this URL must be in the form of an http
get request. There must be a "?" separating the Web page name
from the parameters. The URL must also end with a parameter that
doesn't have a value (i.e. "ProductBarcode="). The client software
appends the scanned bar code data to the end of the URL if the
last character of the URL is "=". Otherwise it does not include the
bar code data and loads the page specified by the URL.
Client.NewPhoneRegRetryCount Number of extensions to ask for when the first extension fails to
register.
Client.PhoneRegRetryCount Number of retries to register with the same extension.
Client.PhoneRegRetryInterval Interval between successive retries.
Client.Phone.Ring Device side path and filename for the default client ring tone for
incoming phone calls.
Client.Volume.Receiver Default receiver volume on the client. Values 0-6.
Client.Volume.Speaker Default speaker volume on the client. Values 0-6.
Phone.Call.UnicastPacketRate Unicast Call Packet Rate (0-40, in steps of 10).
Phone.Gateway.CallPark.ByGroup.Enable Call Park by Group feature.
Phone.Gateway.CallPark.Enable Call Park functionality is enabled on the PBX.
Phone.Gateway.FAC.CallPark Feature Access Code for Call Park on the PBX.
Phone.Gateway.FAC.CallPick Feature Access Code for Call Pick on the PBX.
Phone.Gateway.IPAddress IP address for the phone gateway used for PBX communications.
1
The Motorola UCA Maintenance Service must be restarted for changes to the System.Maintenance.DB.* and
System.Maintenance.Session.* variables to take effect.