Motorola C330, Service Manual

Page: 23 / 57

6881040B65 August 20, 2002 19
Level 3 Service Manual Tools and Test Equipment
Tools and Test Equipment
Table 1 list the tools and test equipment used on PF 0C35 telephones. Use either
the listed items or equivalents.
Table 1. General Test Equipment and Tools
Motorola
Part Number
1
Description Application
See Table 6 Charger Used to charge battery and to power phone
0180386A82
Antistatic Mat Kit (includes 66-80387A95 antistatic
mat, 66-80334B36 ground cord, and 42-80385A59
wrist band)
Provides protection from damage to phone caused
by electrostatic discharge (ESD)
8102430Z04 GSM / DCS / PCS Test SIM Used to enable manual test mode
6680388B67 Disassembly tool, plastic with flat and pointed
ends (manual opening tool)
Used during assembly/disassembly of phone
6680388B01 Tweezers, plastic Used during assembly/disassembly
RSX4043-A Torque Driver Used to remove and replace screws
—
Torque Driver Bit T-6 Plus, Apex 440-6IP Torx Plus
or equivalent
Used with torque driver
HP34401A
2
Digital Multimeter Used to measure battery voltage
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) by phone at (800) 422-4210 or
FAX (800) 622-6210; Internationally, AAD can be reached by calling (847) 538-8023 or faxing (847) 576-3023.
2. Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.
1 and 2
6881040B65
0C35