manualshive.com logo in svg

Motorola C330, Service Manual

Share
Download
Motorola C330 Service Manual Download Page 32

28

 

        August 20, 2002 

6881040B65

Disassembly

Product Family 0C35

Removing and Replacing the Microphone

1.

Remove the rear housing cover, SIM, endo assembly, front endo assembly, and 
display assembly as described in the procedures.

2.

Turn the display assembly over to reveal the microphone.

3.

Use the disassembly tool to gently pry the microphone out of its socket.as shown 
in Figure 11.

4.

Use the plastic tweezers, carefully lift the microphone up and away from the 
display assembly board.  

5.

To replace,use the plastic tweezers to place the microphone into its socket on 
the plastic section that holds the display assembly. Ensure the microphone 
elastomer faces the circuit board contacts when reattaching the printed circuit 
board.

6.

Replace the display assembly, endo front housing, antenna, endo assembly, 
SIM, and rear housing cover as described in the procedures.

020209o

Figure 11. Removing the Microphone

MICROPHONE

TRANSCEIVER BOARD

PLASTIC

TWEEZERS

1

Summary of Contents for C330


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands