Motorola BSR 2000, Configuration And Management Manual

Page: 83 / 650

Release 1.0 Configuring the System
526360-001-00 Rev. B MGBI 3-33
You can use the cable helper-address command in Interface Configuration mode
to configure DHCP relay on the cable interface. Refer to Use for more
information.
3. Enable the Ethernet interface and the configuration change with the no shutdown
command.
MOT (config-if)#
no shutdown
4. Exit Interface Configuration mode.
MOT (config-if)#
exit
5. Exit Global Configuration mode.
MOT
(config)#
exit
6. Verify that the information was entered correctly by displaying the running
configuration in Privileged EXEC mode.
MOT#
show running-config
Configuring DNS
Domain Name System (DNS) maps host names to IP addresses. For example, it
allows you to reference the host
motorola.com
instead of having to remember that its
IP address is 198.93.23.13.
Configuring DNS involves the following tasks:
■
Specifying DNS Name Servers
■
Configuring the Domain Name
■
Enabling Domain Lookup and Domain List
Specifying DNS Name Servers
Use the ip name-server command in Global Configuration mode to specify a Domain
Name Server (DNS) that helps the BSR match DNS host names with their IP
addresses:
MOT (config)#
ip name-server {<
A.B.C.D
>}
where:
A.B.C.D
is the IP address of the Domain Name Server (DNS).
For example:
MOT
(config)#
ip name server 192.168.1.253