Motorola BSR 2000, Configuration And Management Manual

Page: 547 / 650

Release 1.0 Configuring BGP
526360-001-00 Rev. B MGBI 12-29
Figure 12-10 Assigning a Weight to a Neighbor Connection
Example
For example, the commands in the following example configure Router Los Angeles
(as shown in
Figure 12-10 ) using the neighbor weight command. This configuration
assigns the weight attribute of 1000 to all route updates received from AS 100 and
assigns 500 to the weight attribute of all route updates from AS 300. This causes
Router Los Angeles to send traffic through Router Boston to destinations reachable
via both the ASs.
MOT(config)#router bgp 400
AS 400
192.56.0.0
Boston
LA
AS 200
160.80.0.0
Albany
NY
AS 300
192.24.0.0
AS 100
150.60.0.0
4.4.4.1
3.3.3.1