Motorola BSR 2000, Configuration And Management Manual

Page: 47 / 650

Release 1.0 Using the Command Line Interface
526360-001-00 Rev. B MGBI 2-15
WORD
is the alias name for the command
The alias is removed for the associated command.
■
The show aliases command displays a list of all aliases:
MOT#
show aliases
Alias Examples
The following example creates an alias for the enable command, accessible from
the Privileged EXEC mode.
MOT(config)#
alias exec en enable
This example creates an alias for the router rip command, accessible from the
Global Configuration mode.
MOT(config)#
alias conf rr router rip .
Using the Command History
The CLI provides a record or history of command entries. This feature redisplays long
or complex commands or entries including access lists. This section describes using
the command history feature to complete the following tasks:
■
Setting the Command History Buffer Size
■
Recalling Commands
■
Disabling the Command History Feature
Setting the Command History Buffer Size
By default, the history buffer stores ten command lines. To change the number of
stored command lines for the current terminal session, use the
history size command
in User EXEC or Privileged EXEC mode:
MOT >
history size <
1-256
>
where:
1-256
is the number of lines of the history buffer.
Recalling Commands
To recall commands from the history buffer, perform one of the following actions: