Motorola BSR 2000, Configuration And Management Manual

Page: 201 / 650

Release 1.0 Configuring the CMTS
526360-001-00 Rev. B MGBI 6-15
Displaying Host Authorization Information
Use the following show command options to view host authorization information in
all modes except UserEXEC mode:
■
If you want to view a summary of ARP authorization table information, issue the
show host authorization cpe leased command:
MOT#
show host authorization summary
Figure 6-1 displays typical show host authorization summary command output.
Figure 6-1 show host authorization summary Command Output
■
If you want to view the type, host IP address and host MAC address of dynamic
entries in the ARP authorization table, issue the
show host authorization cpe
leased command:
MOT#
show host authorization cpe leased
■
If you want to view the type, host IP address and host MAC address of static
entries and DHCP lease query information for CPEs only, issue the
show host
authorization cpe static command:
MOT#
show host authorization cpe static
■
If you want to view all entries or the entries for a specified CMTS module in the
ARP authorization table on the BSR, issue the
show host authorization
command:
MOT#
show host authorization
Interface Total Total Total Dynamic Static Total
Modems Hosts Routers Entries Entries Entries
Cable 0/0 14 0 0 14 0 0
Cable 0/1 15 0 0 15 0 0
Totals 29 0 0 29 0 29