32
10. Advanced settings
Advanced settings availability are dependent on the CAT-iq base that is being
used.
10.1 DECT settings
10.1.1 Change PIN
Some functions are protected by a 4 digit PIN code which must be entered if
the settings are changed. The default depends on the base. The PIN can be
changed to a preferred number.
When entering a PIN, the digits are shown as ****
1. Press
Menu
, scroll
d
to
Advanced
Settings
and press
Select
.
2.
DECT Settings
is highlighted. Press
Select
.
3.
Change PIN
is highlighted. Press
Select
.
4. Enter the old PIN and press
Ok
.
5. Enter the new PIN and press
Ok
.
6. Re-enter the new PIN and press
Save
.
7. Press
e
to return to standby.
10.1.2 Clock master
The phone can be set so that the base or handset can be the clock master,
once set this will sync across all handset.
1. Press
Menu
, scroll
d
to
Advanced
Settings
and press
Select
.
2.
DECT Settings
is highlighted. Press
Select
.
3. Scroll
d
to
Clock Master
and press
Select
.
4. Scroll
u
or
d
to
Base
or
Handset
and press
Select
.
5. Press
e
to return to standby.
10.1.3 ECO +
You can set the base ECO + mode via this menu, and the transmission power
method depends on the base.
1. Press
Menu
, scroll
d
to
Advanced
Settings
and press
Select
.
2.
DECT Settings
is highlighted. Press
Select
.
3. Scroll
d
to
ECO +
and press
Select
.
4. Scroll
u
or
d
to
De-activate
or
Activate
and press
Select
.
5. Press
e
to return to standby.
10.1.4 Base version
1. Press
Menu
, scroll
d
to
Advanced
Settings
and press
Select
.
2.
DECT Settings
is highlighted. Press
Select
.
3. Scroll
d
to
Base Version
and press
Select
.
Advanced settings
