adapter.
The connection status LED indicator will turn on once a network link has been established.
2. Position the camera in the mounting adapter, reinserting the connected cable through the cable entry
hole.
3. Align the camera housing clips on the camera base to the camera attachment retainers on the
mounting adapter. Press the camera base into the mounting adapter. The camera base clicks into
place and is held securely.
Initializing a Camera Username and Password
Cameras manufactured after January 1, 2020, do not have a default username or password and will be in a
factory default state.
Important:
You must create a user with
administrator
privileges before the camera is operational.
The first user can be created using any of the following methods:
l
Camera's Web Interface: enter the camera's IP address in a web browser to access the web
interface. If the camera is in the factory default state you will be redirected to the Add a new user
page to create the first user. For more information, see the
Avigilon High Definition H4 and H5 IP
Camera Web Interface User Guide.
l
Camera Configuration Tool version 1.4.4 or later: cameras discovered in the factory default state will
be identified by
. Select the
Admin Users
tab to create the first user. For more information, see
the
Avigilon Camera Configuration Tool User Guide
.
l
USB Wi-Fi Adapter: when connecting a camera in the factory default state, you will be redirected to
the Create Administrator User page to create the first user. For more information, see
Avigilon USB
Wi-Fi Adapter System User Guide
.
Initializing a Camera Username and Password
14
