30
Common Radio Features
Scan
The scan feature allows you to monitor traffic on different channels by
scanning a preprogrammed list of channels. The list must be
preprogrammed by a qualified technician.
Turn Scan On and Off
Use the Preprogrammed Scan On/Off Switch
Delete a Nuisance Channel
When the radio scans to a channel that you do not wish to hear
(nuisance channel), you can temporarily delete the channel from the
scan list.
Place the
Scan On/Off
Switch or Button in the “scan
on” or “scan off” position.
1
When the radio is locked
onto the channel to be
deleted, press the
preprogrammed
Nuisance
Delete
button.
Repeat this step to delete
more channels.
Note:
You cannot delete priority
channels or the
designated transmit
channel.
2
The radio continues
scanning the remaining
channels in the list. To
resume scanning the deleted
channel, change channels or
turn scan off and then back
on again.
6816983H01.book Page 30 Tuesday, April 29, 2008 6:57 PM
