Motorola ASTRO MT 1500 Model 1 User Manual Download Page 38

Page: 38 / 76

MT 1500 Model 1

Common Radio Features

Send a Silent Emergency Alarm

Send an Emergency Call

An Emergency Call will send a type of dispatch giving your radio
priority access to channels.

With your radio turned on,
press the

Emergency

button. The LED does not
light, and you hear no tones.

• LED does not light
• No tones

Note:

To exit emergency at any time, press and hold the

Emergency

button for about a second.

The silent emergency state
continues until you:

Press and hold the

Emergency

button for about

a second to exit the
emergency state.

Press and release the

PTT

button to exit silent
emergency and enter regular
dispatch or emergency call.

• Press and hold

Emergency

button

• Press and release the

PTT

button

With your radio turned on,
press the

Emergency

button. A short, medium-
pitched tone sounds.

• Short tone

Note:

To exit emergency at any time, press and hold the

Emergency

button.

Press and hold the

PTT

button and announce your
emergency into the
microphone.

6816983H01.book Page 27 Tuesday, April 29, 2008 6:57 PM

Summary of Contents for ASTRO MT 1500 Model 1













































































Search results

Summary of Contents for ASTRO MT 1500 Model 1

Reviews:

Related manuals for ASTRO MT 1500 Model 1

Brands by name

Popular brands

Motorola ASTRO MT 1500 Model 1, User Manual

Search results

Summary of Contents for ASTRO MT 1500 Model 1

Reviews:

Related manuals for ASTRO MT 1500 Model 1

Brands by name

Popular brands