manualshive.com logo in svg

Motorola Astro Dimetra MTP, Instruction Manual, Page: 20 / 76

Share
Download
Motorola Astro Dimetra MTP Instruction Manual Download Page 20

10

Figure 2 Microphone Bracket Installation Detail

Visor Microphone 
Installation

1.

Referring to Figure 3, clip the microphone to the vehicle’s visor.

2.

To avoid visual or physical obstruction, route the microphone 
cable down inside the door molding and beneath the seat. Allow 
sufficient slack in the connector end of the cable to reach the 
XTVA.

Figure 3 Installing the Visor Microphone 

For information on connecting the visor microphone to the XTVA, see 
the XTVA Accessory Connector Installation Manual, Motorola 
publication 68P81092C83 (included with this manual).

Antenna 
Installation

Install the antenna and antenna cable as outlined in the installation 
instructions supplied with the antenna. Pertinent information on 
frequency matching and mounting details are also provided with each 
antenna.

Note: The RF connector (J3) on XTVA console models N1799_

and N2001_ is a mini-UHF jack, and must be mated with
either an antenna mini-UHF plug (P3) or an appropriate
adapter (Motorola part numbers: 5880367B21 [mini-UHF-
to-N]; 5880367B22 [mini-UHF-to-UHF]; or 5880367B24 
[mini-UHF-to-TNC]).

Note: For XTVA console models N2000_, N2002_ and N2003_, 

the RF connector (J3) is a BNC-type connector that must be 
mated with either an antenna BNC plug (P3) or a mini-UHF 
female-type adapter (Motorola part number 5880367B28).

1/8'' DIA. HOLES

BRACKET

SELF-TAPPING SCREWS

NO. 8-15 x 1/2''

1/8” (0.32cm) DIA HOLES

Visor

Hands-Free
Microphone

Summary of Contents for Astro Dimetra MTP













































































Reviews:

No comments