Motorola Astro APX 3000 User Manual Download

Page: 80 / 104

Advanced Features

English

Locking and Unlocking the Controls

†‡

You can lock your radio’s programmable buttons to avoid
inadvertent entry. This function can be preprogrammed as a
short press or long press per your request. Refer to your
qualified technician for advice.

Procedure:

Long press the preprogrammed Control Lock button to lock
the controls. Associated Voice announcement will be played
if preprogrammed.

The display shows

CTRL LCK

Long press again to unlock the controls. Associated Voice
announcement will be played if preprogrammed.

Turning Voice Mute On or Off

†‡

You can enable and disable voice transmission, if needed.

Procedure:

Press the preprogrammed

Voice Mute

button to turn the

feature off or on.

The display shows momentary

VMUT OFF

, and a short tone

sounds, indicating that the feature is disabled. You hear
associated Voice announcement if preprogrammed.

The display shows momentary

VMUT ON

, and a short tone

sounds, indicating that the feature is enabled. You hear
associated Voice announcement if preprogrammed.



APX_3000_M1.book Page 64 Thursday, November 7, 2013 4:48 PM

Summary of Contents for Astro APX 3000









































































































Search results

Summary of Contents for Astro APX 3000

Reviews:

Related manuals for Astro APX 3000

Brands by name

Popular brands

Motorola Astro APX 3000, User Manual

Search results

Summary of Contents for Astro APX 3000

Reviews:

Related manuals for Astro APX 3000

Brands by name

Popular brands