Motorola APX8500 Manual Download

Page: 262 / 273

NEXT >

< PREV

CONTENTS

UTILITIES

Programmable Button Configurations for Gun Lock

Unlocking All Gun Locks

262

Unlocking All Gun Locks With Relock Timer

Procedure:

Press the preprogrammed Gun Lock button.

All the Gun Locks open concurrently.

Place or remove your guns from the Gun Locks in the sequence from Gun Lock 1 to Gun Lock 3.

The locks close when the timer for each lock expires. The locks are arranged in the sequence from Gun
Lock 1 to Gun Lock 3.

Unlocking All Gun Locks Without Relock Timer

Procedure:

Press the preprogrammed Gun Lock button.

All the Gun Locks open.

Place or remove the required guns from the Gun Locks.

Release the preprogrammed Gun Lock button

All the Gun Locks close.

Summary of Contents for APX8500


















































































































































































































































































Search results

Summary of Contents for APX8500

Reviews:

Related manuals for APX8500

Brands by name

Popular brands

Motorola APX8500, Manual

Search results

Summary of Contents for APX8500

Reviews:

Related manuals for APX8500

Brands by name

Popular brands