You can still send text messages without logging in as a user. The user login feature only enables the
recipient of your message to identify you as the sender by assigning a username to your message.
This feature is only applicable for LMR Messaging.
5.1.2.1
Logging In to Automatic Registration Service
Procedure:
1
From the
Home
screen, tap
Shift Manager Launcher
.
2
Tap
User Login
, then perform one of the following actions:
If…
Then…
To log in with an existing ID,
Tap the ID.
To log in with a new ID,
a
Tap
Login with new ID
.
b
Enter the User Login ID, then tap
Done
.
3
Enter the authorized PIN, then tap
Done
.
If a PIN is not assigned to the ID, skip this step.
The display shows the
Progress
screen. If the channel does not support Automatic Registration
Service login, the display shows the status as
Offline
.
4
While sign in is in progress, tap
Hide
.
After the login is completed, the
Identity and Status Widget
shows the login ID.
5.1.2.2
Logging Out of Automatic Registration Service
Procedure:
1
From the
Home
screen, tap
Shift Manager Launcher
.
2
Tap your ID, then tap
Yes
to confirm the request.
3
Perform one of the following actions:
• To clear the private data, tap
Yes
.
• To keep your private data, tap
No
.
5.1.3
Entering the Soft ID
Soft ID entry is only allowed if it is enabled and User Login is not used.
MN005642A01-AN
Chapter 5 : Home Screen
34
