Motorola APX 7000XE Instruction Manual Download Page 39

Page: 39 / 55

APX 7000XE M3.5

NEXT >

< PREV

CONTENTS



Emergency Operation

Sending an Emergency Alarm with Emergency Call

ADVANCED FEATURES

Procedure:

Press the preprogrammed

Emergency

button.

The display shows

Emergency

and the current zone or

channel.

You hear a short, medium-pitched tone and the LED

momentarily blinks red.

You hear the radio sounds a short low-pitched tone to

indicate the selected channel does not support emergency
and rejects to launch emergency mode.

The display shows

No emergency

, if the selected channel

does not support emergency.

The radio enters the Emergency Call state when:

You press the

PTT

button while in the Emergency Alarm

mode.

Press and hold the

PTT

button.

Speak clearly into the microphone.

Release the

PTT

button to end the transmission and wait

for a response from the dispatcher.

Press and hold the preprogrammed

Emergency

button for

about a second to exit the Emergency Call mode.

Summary of Contents for APX 7000XE
























































Search results

Summary of Contents for APX 7000XE

Reviews:

Related manuals for APX 7000XE

Brands by name

Popular brands

Motorola APX 7000XE, Instruction Manual

Search results

Summary of Contents for APX 7000XE

Reviews:

Related manuals for APX 7000XE

Brands by name

Popular brands