Motorola APX 400Li User Manual Download

Page: 66 / 90

Turning the Controls and Buttons Tones On or Off

You can enable and disable the tones of Navigation
buttons and controls if needed.

•

Turning the tones on or off via the preprogrammed

Mute

button:

a) To turn the tones off or on, press the

preprogrammed

Mute

button.

•

Turning the tones on or off via the radio menu:
a) Press the

Menu Select

button directly below

Mute

The display shows momentary

Tones off

indicating that the tones are disabled or the
display shows momentary

Tones on

, and you

hear a short tone indicating that the tones are
enabled.

Turning Voice Mute On or Off

You can enable and disable voice transmission, if
needed.

•

Turning Voice Mute on or off via the
preprogrammed

Voice Mute

button:

a) To turn the feature off or on, press the

preprogrammed

Voice Mute

button.

•

Turning Voice Mute on or off via the radio menu:
a) Press the

Menu Select

button directly below

VMut

The display shows momentary

Voice mute off

, and

you hear a short tone, indicating that the feature is
disabled or the display shows momentary

Voice

mute on

, and you hear a short tone, indicating that

the feature is enabled.

Using the Time-Out Timer

This feature turns off your radio’s transmitter. You
cannot transmit longer than the preset timer setting.

If you attempt to do so, the radio automatically stops
your transmission, and you hear a talk-prohibit tone.

The timer is defaulted at 60 seconds, but it can be
preprogrammed from 3 to 120 seconds, in 15-second
intervals, or it can be disabled entirely for each radio
mode, by a qualified radio technician.

Note:

You hear a brief, low-pitched, warning tone four

seconds before the transmission times out.

Advanced Features

English

Summary of Contents for APX 400Li



























































































Search results

Summary of Contents for APX 400Li

Reviews:

Related manuals for APX 400Li

Brands by name

Popular brands

Motorola APX 400Li, User Manual

Search results

Summary of Contents for APX 400Li

Reviews:

Related manuals for APX 400Li

Brands by name

Popular brands