Motorola APX 2000 User Manual Download

Page: 99 / 206

Release the

PTT

button to end the transmission

and wait for a response from the dispatcher.

To exit Emergency Call, press and hold the
preprogrammed

Emergency

button for about a

second.
Turning the radio off also cancels the emergency
state.

Sending a Silent Emergency Alarm

This feature allows you to send an Emergency Alarm
to the system without triggering any audio or visual
indicators.

Press the preprogrammed

Emergency

button.

The display shows no changes, the LED does not
light up, and you hear no tones. The silent
emergency state continues until you perform the
next step.

Perform one of the following actions:

• You press and hold the preprogrammed

Emergency

button for about a second to exit

the Silent Emergency Alarm mode.

• Press and release the

PTT

button to exit the

Silent Emergency Alarm mode and enter
regular dispatch or Emergency Call mode.

Change of Channels during Emergency

For ALL Emergency transmissions, when changing
channels:

• If the new channel is also preprogrammed for

Emergency, you can change channels while in
Emergency operation. The emergency alarm or
call continues on the new channel.

• If the new channel is

not

preprogrammed for

Emergency, the display shows

No emergency

and you hear an invalid tone until you exit the
Emergency state or change to a channel
preprogrammed for Emergency.

Emergency Keep-Alive Feature

This feature, when enabled, prevents the radio from
being turned off via the

MFK

when the radio is in the

Emergency state.

Note:

The radio only exits the Emergency state using

one of the ways mentioned in the previous sections.

Advanced Features

English

Summary of Contents for APX 2000















































































































































































































Search results

Summary of Contents for APX 2000

Reviews:

Related manuals for APX 2000

Brands by name

Popular brands

Motorola APX 2000, User Manual

Search results

Summary of Contents for APX 2000

Reviews:

Related manuals for APX 2000

Brands by name

Popular brands