16
AP-8163 Access Point
1.10.3 AP-8163 Grounding Post
The grounding post is located on the bottom of the Access Point above the GND symbol.
The grounding cable can be attached to the unit using one of the following methods:
•
Use a grounding screw to securely attach the grounding cable to the grounding post. Use an 8mm socket
and driver to tighten the grounding screw to 30 inch pounds (lbf-in).
•
Attach a ring lug to the grounding cable and use a grounding screw to securely attach the ring lug to the
Access Point. Use an 8mm socket and driver to tighten the grounding screw to 30 inch pounds (lbf-in).
WARNING!
The grounding cable for an AP-8163
must
be at a minimum a #10 gauge wire cross
section.
