Motorola AirDefense Model 510, Installation Manual

Page: 15 / 48

Hardware 9
LED 1: off
LED 2: solid GREEN
LED 3: blinking
GREEN
Sensor is receiving
power, has
received DHCP or
is configured for
static IP, and is
attempting to
connect to the
AirDefense server.
Sensor is likely in
process of booting or
cannot find the
AirDefense server
(primary or
secondary). Wait
approximately one
minute. If this condition
continues, contact
AirDefense customer
support.
LED 1: off
LED 2: solid GREEN
LED 3: solid GREEN
Sensor is receiving
power, is
connected to the
server, and is not
detecting any radio
traffic (a, b or g)
No 802.11a, b or g
radio traffic is being
observed. If you are
sure that there is
wireless traffic nearby,
contact AirDefense
customer support.
LED 1: N/A
LED 2: solid AMBER
LED 3: solid AMBER
Sensor firmware is
being upgraded.
Sensor firmware
upgrade in process –
do not unplug.
LED 1: blinking
AMBER
LED 2: solid AMBER
LED 3: blinking
AMBER
Sensor is receiving
power, and Sensor
“Locate” command
has been issued.
You can physically
locate a Sensor, by
sending “Locate”
command from Sensor
UI. Log into Sensor UI
and turn “Locate”
option off.
LEDs LED Appearance Description Possible Cause
& Remedy
N/A