Motorola Advisor Graphix CP1250, User Manual

Page: 14 / 68

12
Press
s
to move to the first digit of the minutes field.
Press
x
or
w
to adjust the first digit of the minutes.
Repeat Steps 6 and 7 for the second digit of the minutes field and method of
time measurement field. You can change between
AM
and
PM
, but if you are
using the
|
time measurement, you cannot change it here.
Repeat Steps 4 through 8 to enter the ending quiet time setting.
Note: If the end time is equal to the start time, the Quiet Time function
is turned off.
When you are finished, press
t
to accept the selected quiet time period.
One of the following indicators is displayed in the upper-left corner of the
screen:
W
- Quiet time on with no unread messages
W with H flashing - Quiet time enabled with stored, unread messages.
H - Quiet time off with no unread messages.
H
flashing - Quiet time off with stored, unread messages.
Note: When quiet time is turned on and the pager is set for audible alert,
Y is displayed in the upper-left corner of the pager except during the
actual quiet time period.
SETTING
UP
1033B60o.book Page 12 Thursday, August 5, 1999 4:41 PM