background image

A008 / A6188+

Level 1 & 2 Service Manual

30

· 

Labels must meet all the countries specific requirements

· 

Reuse A6188 Cradle. ID modification will not affect Cradle design

Vehicle Power Adapter
· 

Powers the phone and rapid charges the battery from vehicle’ s cigarette

lighter
Socket

· 

Reuse A6188 VPA

Silver Headset
· 

Hand free operation, walk and Talk.

· 

Reuse P7689 headset

Leather Holster
· 

Stylish leather holster. Prefer local source to reduce cost.

· 

Will not create problem to remove the stylus B, making and answer a

call, and
operate with headset

Starfish True Sync CDROM Kit
· 

Able to support Win95/98/2K/NT and Palm (English)

· 

Recorded in a CDROM and bundle sales with Cradle

· 

Package comes in kit with proper packaging d Quick Start Up guides in

English and
localised language support by the software.

· 

New CDROM kit since new features were added and with EMEA

languages.

Plug
· 

Per the standard plug specified by each supported country.

Car Kit
· 

DSP easy install car kit.

Stylus
· 

Stylus A – Retractable and able to fit well in the fitting slot of A008 rear

housing.

· 

Stylus B – Pen type that can fit in the Stylus pocket of the leather case.

Summary of Contents for A008
































































Reviews: