manualshive.com logo in svg

Motorola 880, Service Manual

Share
Download
Motorola 880 Service Manual Download Page 23

© 1997 Motorola, Inc.

68P09403A50

15

TESTING

Dual Band 880/890 (DCS/GSM)

Cellular Subscriber Sector

T

esting

Testing

GSM Verification

Introduction

To test the phone cellular telephone for func-
tional verification, the following equipment
will be required:

• GSM compatible communications

analyzer.

• Antenna test adaptor (Part No

5880348B33), and appropriate cable/
connectors.

• Test SIM card (Part No 8102430Z01).

• Charged battery pack.

Equipment Configuration

Initially insert the test SIM card into the slot
at the rear of the personal cellular telephone.
If required, further information on SIM card
insertion is available on page 12. The tele-
phone’s antenna should now be removed,
see  “Disassembly” on page 29 for further
details. When the antenna has been
removed, attach the antenna adaptor to the
unit. Slide a charged battery on to the back
of the personal telephone, so that the tele-
phone can be powered up. Finally, connect a
cable from the antenna connector to the RF
in/out port of the communications analyzer,
and power both the analyzer and personal
telephone on. The equipment set up shown
in Figure 7: “GSM Testing Configuration”
should now be in place.

Summary of Contents for 880












































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands