Motorola 85 Owner'S Manual Download Page 17

Page: 17 / 64

BASIC OPERATION

P l a c i n g a C a l l

1. With the power on, enter the number you wish to call.

2. Press

3. Begin the conversation when the called party answers.

4. To terminate the call, press

To Correct an Error

To clear the last digit entered, press and quickly release

. To

clear the entire entry, press and hold

until the entire entry

is erased.

If Entering More Than 10 Digits

You can call a phone number with up to 16 digits, but only the
last 10 digits will appear in the display.

When recalling a stored phone number that is longer than 10 dig-
its, the display will ﬂash the memory location number and the last
10 digits of the number. Press

‰

again to view entire number.

Unsuccessful Call Attempts

If you hear one of the following signals, you have not successfully
completed your call.

Tone / Message Description

Cellular System Busy

fast busy

Press

again before ending the unsuccessful

(reorder signal)

call attempt to automatically redial the call

SND TO

(refer to Automatic Redialing page 18), or press

REDIAL

and dial the call again.

Cellular System Could Not Complete the Call

alternating

You may have tried to place a call before the

high/low tone

(No Service) indicator stops ﬂashing to let

(intercept)

you know your phone was fully operative.

SND TO

Either press

again before ending the

REDIAL

unsuccessful call attempt to automatically redial
the call (refer to Automatic Redialing page 18),
or press

and dial the call again.

busy signal

The called party’s line is busy.

Summary of Contents for 85

































































Search results

Summary of Contents for 85

Reviews:

Motorola 85, Owner'S Manual, Page: 17 / 64

Search results

Summary of Contents for 85

Reviews: