The reliable UltraSync GPS-100M generates a time-reference signal that originates from the atomic clocks
on the GPS satellites that orbit the earth. The units come pre-wired for new systems and can be retrofitted
for existing PTP 600 Series links.
UltraSync GpS-100M Features:
• Integral GPS receiver – 12 channel
• Passes 1000 Base-T protocol
• Supports Ethernet cable lengths of up to 330 feet (100 meters) from the PTP 600 PIDU Plus to the
UltraSync GPS-100M Eth1/PWR port
• Robust enclosure weighing approximately 23 ounces (650 grams)
• Small footprint – 5.92” (150 mm) height, 3.95” (100 mm) width and 2.79” (71 mm) depth
• Includes internally mounted GPS antenna, mounting bracket, screws, Ethernet cables and cable
glands for waterproof ingress/egress
• Connects via RJ-45 connector to PTP 600 Series radios equipped with a sync port
• Operates at temperatures to – 40°F to +140°F (-40°C to +60°C), even in high humidity
Ordering
The Memorylink UltraSync GPS-100M can be ordered directly from Motorola under the following part
number and product description:
WB3001
– Memorylink UltraSync GPS-100M for PTP 600
PTP SOLUTIONS GUIDE
31
Motorola has partnered with Memorylink to deploy the Memorylink UltraSync™ GPS-100M in a Motorola
Fixed Point-to-Point (PTP) 600 Series network. With its integrated GPS receiver and internally-mounted
antenna, the UltraSync GPS-100M generates a precise, time-reference signal that is used by the PTP 600
Series radios to time and synchronize transmit and receive signals.
Memorylink UltraSync™ GpS-100M
continued
Memorylink UltraSync GPS-100M
Synchronization Unit
Memorylink UltraSync GPS-100M
installed with a PTP radio and
PTP Lightning Protection Unit
