INTUITY AUDIX LX Release 1.0
Centrex Integration
Issue 1
May 2002
Setting the 202T Modem
Page 6-11
Modem Settings for the Service Provider Switch
6
4. Insert the circuit card in the modem data mounting.
5. Replace the front of the data mounting.
Modem Settings for the Service
Provider Switch
When the Intuity AUDIX uses an AT&T Dataphone 202T modem, the modem
option settings at the service provider switch may vary, depending on the type of
modem. The following tables show the modem options for the
commonly-supported modems.
Modem Options for the AT&T Dataphone
202T Modem
Use the same options as are defined in this document for the modem options the
Intuity AUDIX system uses.
Modem Options for the General Data
Communications 202T Modem
Pin x4 = 4w
Pin x5 = chout
Pin x2 = eqin
S4
1
Closed
Continuous carrier
ZN
In
2
Open
Carrier detector reset
ZM*
Out
3
Closed
State of CC (data set
ready) during analog
loopback
YB
On
Table 6-2.
AT&T Dataphone 202T Modem Option Settings — Continued
Switch
Segment
Position
Feature
Option
(
*
= factory
setting)
Description
Continued on next page