Motorola 1250, Quick Installation Manual

Page: 15 / 36

Installation Steps 9
3.3 Step 3: Launch the Command Line Interface (ADSPadmin)
You must use the appliance's Command Line Interface (CLI) to configure two initial settings:
• Time settings
• IP settings.
Other configuration activities can from the Graphical User Interface (GUI).
You can use SSH to access the CLI remotely, or you can connect a monitor and keyboard directly to
the appliance. The CLI contains a set of administrative utilities, called
ADSPadmin
utilities, which
are organized into four program areas: Manage, Dbase, Software, and Configuration.
1. Turn on power to the ADSP appliance.
The ADSP appliance boots up and a Command Line login prompt displays.
2. Type the Default Command Line User account name (smxmgr), and then press <
Enter
>.
Model 4250 Appliance (Front View)
NOTE
The 2U has a redundant Power Supply and if only one Power Supply is
working or plugged in, the alarm will sound. You can reset the power
supply alarm by pressing the red button on the back of the appliance.
NOTE The red LCD
X
button is the
Power Off
button. Press this button for 4
seconds to power down the system.
NOTE Press and hold green LCD check button for 4 seconds or more to restart
appliance.