Optional Accessories
Replacement Parts
Service and Warranty
Other than the replaceable cable assembly, dust
cover, and clip, the PMMN4128 Remote Speaker
Microphone is not repairable. The RSM is
covered under the standard Motorola Solutions
one-year limited warranty.
Coil Cord Replacement Procedure
1.
Remove the screws to disassemble the
RSM.
2.
Remove the cable.
3.
Reassemble the RSM.
Replacing the Dust Cover
1.
Lift both sides of the dust cover.
2.
Pull out the dust cover to dismantle it.
3.
Bend the dust cover.
4.
Insert to the dust cover slot.
Table 2: Optional Accessories
Part Number
Description
PMLN8120
Rx only xL Clear Tube
Earpiece, 3.5mm Jack
Table 3: Replacement Parts
No
Description
1
Low Profile Swivel Clip
(PMLN8121)
2
Dust Cover 10pcs/pack
(PMLN8122)
3
Coil Cord (PMKN4232)
1
2
3
1
2
3
Attaching Swivel Clip
1.
Match and align the arrowhead icons and
side wings.
2.
Push down the top of the clip.
3.
Simultaneously, push slide clip upward.
Detaching Swivel Clip
1.
Push top of the clip to raise the clip to the
highest position.
2.
Lift up the bottom release latch.
3.
Slide the clip to remove the clip.
Refer to manual MN006622A01for other languages: https://
learning.motorolasolutions.com
Notes
1
2
3
2
1
3
