Sarix® Multi Pro Camera Installation Manual
C6715M | 01/24/22
57
1. Brown — AUX1 Auxiliary Power wire, accepts either polarity
2. Blue — AUX2 Auxiliary Power wire, accepts either polarity
3. White — Audio Input (line level)
An external power amplifier should be used when connecting speakers and microphones, as shown
in the diagram.
4. Yellow — Audio Ground return
5. Green — Audio Output (line level)
6. Purple — Relay Output: When active, Output is internally connected with the Ground. Circuit is
open when inactive. Maximum load is 25 V DC, 100 mA.
7. Gray — Relay Ground return
8. Red — Relay Input: To activate, connect the Input to the Ground wire. To deactivate, leave it
disconnected or apply between 3-15 V.
l
* — Relay
l
** — Switch
l
M — Microphone
l
S — Speaker
l
AUX1 — Brown Auxiliary Power wire
l
AUX2 — Blue Auxiliary Power wire
Focusing the Sarix Multi Pro Camera
Ensure this procedure is performed after the dome cover is installed so you can accommodate for the focus
shift caused by the dome bubble.
Ensure you adjust the focus for each of the camera heads included with your Sarix Multi Pro camera.
In the camera web browser interface, use the camera’s Image and Display settings to focus the camera.
