Motorola solutions NNTN8234, User Manual

Page: 12 / 68

10
English
OPERATING INSTRUCTIONS
Dual-Unit Chargers are intended for use
only with the authorized Motorola
Solutions batteries and power supplies
listed in Table 1 and Table 2 on pages 6
and 7; usage with unauthorized products
may prevent proper operation.
The battery charger will accommodate a radio
with an attached battery in the front pocket,
and a battery alone in the rear pocket. To
charge a battery, use the following procedure:
(Refer to Figure 1 on page 12).
1.
Plug the round end of the power supply
cord into the DC Connector at the back of
the charger.
2. Plug the power supply into the
appropriate AC outlet. The charger LED
will blink green once to indicate a
successful power-up.
3. Insert a radio with battery, into the
charger's front pocket by:
a.
aligning the groove on each side of
the radio with the corresponding
raised rail on each side of the
charger pocket.