Motorola solutions MCC 7100 IP, Setup And User Manual

Page: 44 / 170

3
Generate License Certificates for the MCC 7100 IP Dispatch Console. See Generating License
Certificates for the MCC 7100 IP Dispatch Console on page 50 .
4 Optional: Install third-party or cohab software. See Third-Party or Cohab Software Installation on
page 61 .
5 Install the MCC 7100 IP Dispatch Console software. See Installing the MCC 7100 IP Dispatch
Console Software on page 52 .
6
Apply Windows Supplemental Configuration. See Applying the Windows Supplemental
Configuration on page 61 .
7 Configure Provisioning Manager for Consoles. See “Console Configuration in Provisioning
Manager” in the
MCC 7500 Dispatch Console with VPM manual.
NOTICE: Perform this step after Zone and Console Site objects have been configured.
8 Setup the peripherals. See Peripheral Configuration on page 63 .
9
Setup the network. See Setting Up the Network on page 65 .
10 Optional: Load secure keys and Algorithms. See Load Secure Keys and Algorithms on page
55 .
11 Start Elite Admin. See “Starting Elite Admin” in the MCC 7500/7100 Elite Admin User’s Guide
manual.
12
Create a desired
*.elt
file. See “Creating a New Configuration” in the MCC 7500/7100 Elite
Admin User’s Guide manual.
13
Start Dispatch. See “Starting Elite Dispatch” in the MCC 7500/7100 Elite Dispatch User's Guide
manual.
14 Verify Call Functionality. See “Communicating with Radios” in the MCC 7500/7100 Elite
Dispatch User's Guide manual.
Installing the .NET Framework 3.5 Outside the ASTRO RNI
Perform this procedure only if you use Windows 8 operating system. Windows 8 operating system
comes with the .NET Framework, version 4.5. The MCC 7100 IP Dispatch Console software requires
the .NET Framework, version 3.5.
Prerequisites: Locate the installation media form which you installed Windows 8 operating system.
The installation media can be a DVD-ROM or an ISO Image.
Procedure:
1
Open the command prompt window as an administrator.
For more information, see the
Windows Help and Support online help.
2
To install the .NET Framework 3.5 from the
\sources\sxs
folder on the installation media, run
the following command:
DISM /Online /Enable-Feature /FeatureName:NetFx3 /
All /LimitAccess /
Source: <.Net Framework 3.5 files location>
where
<.Net Framework 3.5 files location>
is the full path to the .NET files necessary
to restore the feature, for example,
d:\sources\sxs
Upgrading an Existing MCC 7100 IP Dispatch Console
Follow this procedure for a new installation of the MCC IP Dispatch Console in the ASTRO
®
25 Radio
Network Infrastructure (RNI).
MN000672A01-E
Chapter 2: MCC 7100 IP Dispatch Console Setup and Installation
44 Send Feedback