5. If there are external input or output devices that need to be connected to the camera (for example: door
contacts, relays, etc.), connect the devices to the camera's digital I/O connector cables. For more information
see
Connecting to External Audio and I/O Devices
6. If an external microphone and/or speakers need to be connected to the camera, connect the devices to the
camera's audio I/O cables. For more information, see
Connecting to External Audio and I/O Devices
7. Install the protective cable boot. You may choose to skip this step if you are using the optional junction box.
A
B
C
a. Remove the protective cable boot that is preinstalled over the Ethernet port, then thread one end of the
Ethernet cable through it.
Ensure the orientation of the cable and boot matches the one shown in the image.
b. Crimp the Ethernet cable.
c. After you connect the cable to the camera, slide the boot over the Ethernet port.
Mounting the Bullet Camera
8
