Motorola solutions APX 8000 M2, Owner'S Manual

Page: 65 / 104

APX 8000 M2
65
NEXT > < PREV CONTENTS

Emergency Operation
Sending an Emergency Alarm
ADVANCED FEATURES
This feature allows you to send a data transmission, which
identifies the radio sending the emergency, to the dispatcher.
Note: Emergency button press timer by default is set to 1
second. This timer is programmable from 0
– 6 seconds by a
qualified technician.
Procedure:
1. Press the preprogrammed Emergency button.
The display shows Emergency and the current zone or
channel.
You hear a short, medium-pitched tone and the LED
momentarily blinks red.
OR
You hear the radio sounds a short low-pitched tone to
indicate the selected channel does not support emergency
and rejects to launch emergency mode.
The display shows
No emergency , if the selected
channel does not support emergency.
When you receive the dispatcher’s acknowledgement ,
the display shows
Ack received .
You hear four tones, the alarm ends, and the radio exits
the Emergency Alarm mode.
OR
If no acknowledgement is received, the display shows No
acknowledge .
The alarm ends and the radio exits the Emergency Alarm
mode.