Motorola solutions APX 8000 M2 Owner'S Manual Download Page 45

Page: 45 / 104

APX 8000 M2

NEXT >

< PREV

CONTENTS

IDENTIFYING STATUS INDICATORS

Bluetooth On

Bluetooth is on and ready for Bluetooth connection.

Bluetooth Connected

Bluetooth is currently connected to the external Bluetooth
device.

Wi-Fi

The radio Wi-Fi network is connected.
The number of bars displayed represents the signal
strength of the Wi-Fi signal.

Secure Operation

• On = Secure operation.
• Off = Clear operation.
• Blinking = Receiving an encrypted voice call.

AES Secure Operation

• On = AES Secure operation.
• Off = Clear operation.
• Blinking = Receiving an encrypted voice call.

Location Signal

• On = Location feature is enabled, and location signal is

available.

• Off = Location feature is disabled.
• Blinking = Location feature is enabled, but no location

signal is available.

User Login Indicator (IP Packet Data)

• On = User is currently associated with the radio.
• Off = User is currently not associated with the radio.
• Blinking = Device registration or user registration with

the server failed due to an invalid username or pin.

Data Activity

Data activity is present.

Summary of Contents for APX 8000 M2









































































































Search results

Summary of Contents for APX 8000 M2

Reviews:

Related manuals for APX 8000 M2

Brands by name

Popular brands

Motorola solutions APX 8000 M2, Owner'S Manual

Search results

Summary of Contents for APX 8000 M2

Reviews:

Related manuals for APX 8000 M2

Brands by name

Popular brands