![Motorline professional MR27 Manual Operation Download Page 2](http://html1.mh-extra.com/html/motorline-professional/mr27/mr27_manual-operation_1838712002.webp)
RADAR SENSIBILITY AJUSTMENT AND
PRESENCE DETECTION AREA
Radar Sensibility Ajustment
NOTE:
Increase Sensitivity - Rotate in a clockwise
direction
Reduce Sensitivity - Rotate counter-clockwise
direction.
Presence Detection Area
For a detection area
nearest the door turn the
potentiometer in a
clockwise direction.
For a detection area
farthest from the door
turn the potentiometer
counterclockwise.
≤100mm
NOTE:
Please install the sensor ≤
100mm above the chassis
to avoid loss of sensitivity.
▷ Power Supply
▷ Output
▷ Current (STANDBY)
▷ Cover’s Material
▷ Current (Action)
▷ Instalation Max Height
▷ Cable Length
AC/DC 12 to 30V (-/+10%)
Relays
65mA
ABS
130mA
2500mm
2500mm
MR27
▷ Ray Type
Presence Sensor
Radar
▷ Ray Source
▷ Ray Quantity
▷ Detection Area
▷ Output Time
▷ Reply
▷ Optical Surface
▷ Self-Learning Time
▷ Temperature
▷ Operation’s Indicator
Refleted Infrared
Infrared 940mm
8 emitted, 8 emitted
1600 (W) x 800 (D) mm
500ms
≤100ms
PMMA
10 sec
-40⁰c a 60⁰C
Standby (blue)/ Activ. (red)
▷ Technology
▷ Frequency
▷ Emission
▷ Output Time
▷ Temperature
▷ Transmission frequency density
▷ Detection Range
▷ Detection Mode
Processor
24.125GHz
<20dBm EIRP
0.5s
-20°C a 55°C
<5mW/cm2
4m (W) x 2m (D)
TECHNICAL SPECIFICATIONS
Plastic Post
Cable/Wire
Passing the Cape
Plástic Pin
Cable
NOTE:
Observe the correct cable
path. This format allows complete
isolation of possible water infiltra-
tion, serving to drain water. A correct
placement of the wire provides an
easier installation of the cover.
Presence Sensor’s Detection Area
Please ensure that the area is object’s free
during the process of the sensor’s
self-learning.
1
AC/DC
12-36V
(Relays)
COM
NC
BROWN
YELLOW
GREEN
WHITE
RED
BLACK
5
6
COM
NO
(Relays)
MOVEMENT
PRESENCE
WIRING DIAGRAM
The door will open if an object is placed
in the detection area.
2
If after 18 seconds and no movement
occurs within the infrared’s area, the
sensor will accept the object as part of
the room and closes the door.
3
Remove the object. The system will
send a environment reading signal and
return to the original recording
background.
4
Movement