12A
12B
EN
EN
Remote Programming Operation (PGM ON):
•
Press the buttons indicated in the image simultaneously for 10
seconds and the flashing lamp will flash (the 1st free position appears
in the display).
Each time you store 1 remote control, the control board will exit remote
programming. If you want to memorize more remote controls, you
will always have to repeat the process of pressing the remote control
buttons simultaneously for 10 seconds for each new remote control.
01
• Press MENU for 2 sec. until it appears .
02
• Use UP until appears .
03
• Press Menu will appear .
04
• Press MENU to edit the value.
05
• Use UP and DW to change the value.
06
• Press MENU to save the new value.
00 (disables human present)
Whenever an order is sent to the
LO input and the motor performs a
complete maneuver.
Man present
01 (active human present)
The motor only works if you keep
the LS button pressed.
With the man present active
the RF remote controls do not work.
00 (disables pushbutton mode)
01 (active pushbutton mode)
Allows you to define how the LS
input works.
00 (disables input to
emergency stop device)
01 (input for emergency stop
devices)
If you have the LS submenu in 01
(active) and the PL submenu in 01
(active), the error appears
.
Default value (
00
)
LS
LO
01
ON
Full
closing
Full
opening
00
OFF
Pedestrian
maneuvers
Total
maneuvers
01
• Press MENU for 10 sec. until it appears
.
02
• Press MENU until it appears
. Use UP or DW to navigate the parameters.
03
• Press MENU to edit the chosen parameter value.
04
• The factory set time appears. Use UP and DW to change the value.
05
• Press MENU to save the new value.
00 human presence
01 function activated
This menu allows activate/disable soft start.
With the soft start function activated, at each start of movement, the control board will control
the start of the motor, gradually increasing in the first second of operation.
Default value (
00
)
01
• Press MENU for 10 sec. until it appears
.
02
• Use UP until appear
.
03
• Press Menu will appear
.
04
• Press MENU to edit the value.
05
• Use UP and DW to change the value.
06
• Press MENU to save the new value.
01
• Press MENU for 10 sec. until it appears
.
02
• Use UP until appears .
03
• Press Menu will appear .
04
• Press MENU to edit the value.
05
• Use UP and DW to change the value.
06
• Press MENU to save the new value.
Allows to adjust the courtesy light time. The courtesy light is activated for the set time when the
gate is in the closed, open and standing position.
The E2 menu will only be available in the case if the courtesy light function is activated in the
P8 menu option 2 (see page 11B)
Default value (
00
)
SOFT START
COURTESY LIGHT TIME
REMOTE PROGRAMMING
HUMAN PRESENT
04. PROGRAMMING "P"
05. PROGRAMMING "E"
05. PROGRAMMING "E"
05. PROGRAMMING "E"
