8A
8B
1
2
3
3
3
A
B
B
A
B
A
EN
EN
03. INSTALLATION
04. LIMIT SWITCHES
FIXATION OF THE SAFE PROFILE COVER
LIMIT SWITCHES ADJUSTMENT
Fit the cover into the top slot on the
safe profile.
Close the cover by pushing it so that it
rotates over the slots.
Place screws on the tabs on the sides
of the safe profile to secure the cover.
FIT THE COVER
1
2
3
Before starting to adjust the limit switches, confirm the orientation of your motor's tuning arrows. This
can have one or two possible orientations on the same motor: arrows oriented in or out. In any posi-
tion, adjustment A rotates the tube from top to bottom and adjustment B rotates from bottom to top.
Any of the settings can be for opening or closing depending on the winding of the tarpaulin (interior or
exterior winding).
In the case of CORTINA ZIP, the tarpaulin winding is
done from the inside:
• Adjustment A - Opening
• Adjustment B - Closure
POSITION 1
INSIDE ARROWS
Adjustment
A
Adjustment
B
Adjustment
B
Adjustment
A
WINDING
POSITION 2
EXTERIOR ARROWS
ATTENTION:
All information given on this page is compatible with motors installed with the
head on the left side. If you want to install on the right side, reverse the information.
Before closing the cover of the safe, make the
LIMIT SWITCHES ADJUSTMENT
as indicated on
the page on the right (page 8B).
