(4) Starting The Engine
Once all checks described in the
IV.(1) Daily checks
section have been carried out, you may proceed to
start engine as follows:
Place the vehicle on its centre stand with the rear
wheel lifted off the ground.
Insert the key in the ignition switch
(1)
and rotate it to
(ON)
.
Keep the throttle control in the closed position.
While pulling the either brake lever press the
starter button
(2)
as shown.
(1) (2)
Never start the engine without its air box.
Dust or foreign objects may enter the engine and
damage it.
After starting the engine ride at moderate
speed during the first few minutes. A correct engine
warm-up limits
the emissions and reduces fuel
consumption.
To prevent damage, do not rev up the engine
when cold. To safeguard the integrity and lifespan of
the engine, avoid riding at high revs for long periods.
Do not suddenly switch off the vehicle after riding
for a long time at the maximum speed; let it run at
idle for a few seconds.
Summary of Contents for XP125
Page 1: ...XP50 XP125...
Page 2: ......
