Motor Power Company DUET_FL 48/10, User Manual

Page: 44 / 196

Page 44
Configuring application parameters
General configuration
The possible options depend on the selected general configuration which can be set in the menu
Parameters/Application parameters/General configuration . The following menu in which you can
select the drive configuration will be displayed:
In the Application section, you can define whether your application is a rotary or a translatory
application.
If you want to use the unit of the outgoing shaft for the configuration of your application, click the "…"
button in the
Gearbox field or click the Settings button. This will lead you to the Display units menu
described in chapter Configuring the display units .
Application examples:
•
Rotary with gearbox:
Opening / closing a barrier.
•
Translatory with feed constant:
Positioning a carriage to transport goods for further treatment.
Configuring the display units
The menu Options/Display units can be used to configure the display units for positions, speeds and
accelerations. These unit will be used only for the display in the parametrization program. The
parametrization program uses so-called communication objects to communicate with the controller.
These communication objects have a fixed physical basic unit. These basic units are used for every
access via the RS232 interface.
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company